Assembly instructions for Server Rack Enclosure
Now screw the four adjustable feet into the corner of the bottom plate adjust the height of the nut to raise or lower the feet step 3 fit the horizontal support rails to the rack frame using m6 bolts and m6 cage nuts there are three support rails for each side of the rack frame keeping the horizontal rails equal distance apart is a good idea using a screwdriver fix the horizontal support rail in place using m6 screws and m6 cage nuts step four fit.
The Refurbished rack server strip to the horizontal support rails using m6 screws and m6 cage nuts place the cave nuts into the position you would like to mount the front and rear rack server strip a pair of cage nuts should be used at both ends of the horizontal support rail.
When step four is complete repeat step three and step four on the opposite side of the racking closure step 5 fit the front and rear doors using the door pins provided place the door pin into position then line up the hole in the bottom of the rack server door and lift the door onto the door pin secure the door in position using the spring bolt step 6 fit the side panels to the rack server enclosure each side panel will fit securely in place by first lining up the grooves.
At the
bottom of the side panel then the two slam locks can be pushed into position
step seven to stabilize your racking closure into a permanent position adjust
the stabilizing feet so that they take the weight of the enclosure and prevent
any movement your rack server enclosure
is now complete and ready to use.
Comments
Post a Comment